Skip to main content

Debian Install

1. After booting the ISO choose graphical install.  Make sure there is a working network connection otherwise the install will not work.
image.png
2. English
image.png
3. United States
image.png
4. American English
image.png
5. Enter SangomaPBX
image.png
6. Enter the domain of the network or just leave it blank.
image.png
7. Create a password for the Root user that will also be used for the login user that will be created later
image.png
8. This will be the main user that will login with ssh make sure to record this username
image.png
9. Use the same password as used for the root account
image.png
10. Usually Central
image.png
11. Choose "use entire disk"
image.png
12. In a VM there should only be 1 option
image.png
13. All files in 1 partition
image.png
14. Finish partitioning
image.png
15. Make sure to change this to Yes and continue
image.png
16. Do not scan for additional media
image.png
17. Choose United States
image.png
18. Choose deb.debian.org
image.png
19. No proxy is needed leave it blank and click continue
image.png
20. Choose No and continue
image.png
21. Make sure that the following are selected:
  • Debian desktop environment
  • Cinnamon
  • SSH server
  • standard system utilities
image.png
22. This will take about ~5 minutes to download and install all of the packages
image.png
23. Choose yes to install grub
image.png
24. There should only be one option available make sure to select it
image.png
25. Choose continue to reboot
image.png

Post install

1. login with the root user to do final configuration
image.png
 2. Open the terminal from the taskbar on the bottom and run the command
usermod -aG sudo pbxenjoyer
Replace pbxenjoyer with a different username if a different username was used
image.png
3. Logout by clicking the menu in the bottom left and then clicking the Green exit button.  Log back in as pbxenjoyer with the password that was set for it earlier (should be the same as the root user)
image.png

FreePBX install

1. At this point SSH is installed and running you can ssh into the server:
ssh pbxenjoyer@10.0.0.10
Replace the IP with the server IP which can be found by clicking the Network Icon on the bottom right.
2. Either in SSH or the Terminal run this command to install FreePBX.  This will take about 5 minutes to install.
cd /tmp
wget https://github.com/FreePBX/sng_freepbx_debian_install/raw/master/sng_freepbx_debian_install.sh  -O /tmp/sng_freepbx_debian_install.sh
sudo bash /tmp/sng_freepbx_debian_install.sh
3. After it is finished running you can go the IP address in your browser to access the FreePBX webui and complete the PBX setup.


Back to top